Instruction manual

IMS01Y06-E6

i-1

Thank you for purchasing this RKC product. In order to achieve maximum performance and ensure

proper operation of your new instrument, carefully read all the instructions in this manual. Please

place the manual in a convenient location for easy reference.

SYMBOLS

: This mark indicates important information on installation, handling and operating

procedures.

: This mark indicates supplemental information on installation, handling and

operating procedures.

: This mark indicates where additional information may be located.

z An external protection device must be installed if failure of this instrument

could result in damage to the instrument, equipment or injury to personnel.

z All wiring must be completed before power is turned on to prevent electric

shock, fire or damage to instrument and equipment.

z This instrument must be used in accordance with the specifications to

prevent fire or damage to instrument and equipment.

z This instrument is not intended for use in locations subject to flammable or

explosive gases.

z Do not touch high-voltage connections such as power supply terminals, etc.

to avoid electric shock.

z RKC is not responsible if this instrument is repaired, modified or

disassembled by other than factory-approved personnel. Malfunction can

occur and warranty is void under these conditions.

CAUTION

: This mark indicates precautions that must be taken if there is danger of electric

shock, fire, etc., which could result in loss of life or injury.

: This mark indicates that if these precautions and operating procedures are not

taken, damage to the instrument may result.

: This mark indicates that all precautions should be taken for safe usage.

WARNING