Instruction manual

7. COMMUNICATION DATA LIST
IMR01Y06-E6
28
 Remote output
Data direction: Master station (PLC) → COM-JC (Remote device station)
Data capacity: 32-bit
Address Communication item Data range
Factory
set value
RYn0 Bit 0 Extension number for display
Display extension number are specified
by the ON/OFF states of RYn0 to
RYn5.
Data 0: OFF 1: ON
[Decimal number: 0 to 63]
0
RYn1 Bit 1
RYn2 Bit 2
RYn3 Bit 3
RYn4 Bit 4
RYn5 Bit 5
RYn6 Bit 0 Extension number for setting
Setting extension number are specified
by the ON/OFF states of RYn6 to
RYnB.
Data 0: OFF 1: ON
[Decimal number: 0 to 63]
0
RYn7 Bit 1
RYn8 Bit 2
RYn9 Bit 3
RYnA Bit 4
RYnB Bit 5
RYnC Extended display flag 0: OFF
1: ON
0
RYnD Extended setting flag
(Setting update flag)
0: OFF
1: ON
0
RYnE Unused
⎯
⎯
RYnF RUN/STOP transfer
Logic of RUN/STOP transfer is
different by model code.
For COM-JC∗01-1
0: RUN (Control start)
1: STOP (Control stop)
For COM-JC∗01-2
0: STOP (Control stop)
1: RUN (Control start)
0
RY(n+1)0 Reserved
⎯
⎯
y
y
y
RY(n+1)7
RY(n+1)8 Initialize data processing completion
flag
0: OFF
1: ON
0
RY(n+1)9 Initialize data setting request flag 0: OFF
1: ON
0
RY(n+1)A Error reset request flag 0: OFF
1: ON
0
RY(n+1)B Reserved
⎯
⎯
y
y
y
RY(n+1)F