Instruction manual

7. COMMUNICATION DATA LIST
IMR01Y06-E6
51
 Remote register (RWw)
Data direction: Master station (PLC) → COM-JC (Remote device station)
Data capacity: 32-word
Address Communication item Data range
Factory
set value
RWwn Device address 1 Set value (SV) Setting limiter low to
Setting limiter high
0
RWwn+1
Device address 2 Set value (SV) 0
RWwn+2
Device address 3 Set value (SV) 0
RWwn+3
Device address 4 Set value (SV) 0
RWwn+4
Device address 5 Set value (SV) 0
RWwn+5
Device address 6 Set value (SV) 0
RWwn+6
Device address 7 Set value (SV) 0
RWwn+7
Device address 8 Set value (SV) 0
RWwn+8
Device address 9 Set value (SV) 0
RWwn+9
Device address 10 Set value (SV) 0
RWwn+A
Device address 11 Set value (SV) 0
RWwn+B
Device address 12 Set value (SV) 0
RWwn+C
Device address 13 Set value (SV) 0
RWwn+D
Device address 14 Set value (SV) 0
RWwn+E
Device address 15 Set value (SV) 0
RWwn+F
Device address 16 Set value (SV) 0
RWwn+10
Device address 1 For extended area setting
Data corresponding to the
extension number specified by
setting the setting extension
number from RYn6 to RYnB
and from RY(n+1)8 to
RY(n+1)A.
⎯
RWwn+11
Device address 2 For extended area setting
⎯
RWwn+12
Device address 3 For extended area setting
⎯
RWwn+13
Device address 4 For extended area setting
⎯
RWwn+14
Device address 5 For extended area setting
⎯
RWwn+15
Device address 6 For extended area setting
⎯
RWwn+16
Device address 7 For extended area setting
⎯
RWwn+17
Device address 8 For extended area setting
⎯
RWwn+18
Device address 9 For extended area setting
⎯
RWwn+19 Device address 10 For extended area setting
⎯
RWwn+1A Device address 11 For extended area setting
⎯
RWwn+1B Device address 12 For extended area setting
⎯
RWwn+1C Device address 13 For extended area setting
⎯
RWwn+1D Device address 14 For extended area setting
⎯
RWwn+1E Device address 15 For extended area setting
⎯
RWwn+1F Device address 16 For extended area setting
⎯
When the Set value (SV) assigned to the Remote register (RWw) as a fixed value is changed,
operation of the extension setting flag (setting update flag) is also necessary. For details,
refer to  Extension number for setting selection processing (P. 24).