Instruction manual

7. COMMUNICATION DATA LIST
IMR01Y06-E6
80
Table 2: Output assignment
[FB100]
Set value Output 1 (OUT1) Output 2 (OUT2) Digital output 1 (DO1) Digital output 2 (DO2)
1 Control output 1 Control output 2 Event 1 (EV1) Event 2 (EV2)
2 Control output 1 Control output 2 Event 1 (EV1) Event 4 (EV4)
3 Control output 1 Control output 2 Event 1 (EV1) HBA
4 Control output 1 Control output 2 Event 1 (EV1) FAIL (De-energized)
5 Control output 1 Control output 2 Event 4 (EV4) HBA
6 Control output 1 Control output 2 Event 4 (EV4) FAIL (De-energized)
7 Control output 1 Control output 2 HBA FAIL (De-energized)
8 Control output 1 HBA Event 1 (EV1) Event 2 (EV2)
9 Control output 1 HBA Event 1 (EV1) Event 4 (EV4)
10 Control output 1 HBA Event 1 (EV1) FAIL (De-energized)
11 Control output 1 HBA Event 4 (EV4) FAIL (De-energized)
12 Control output 1 FAIL (De-energized) Event 1 (EV1) Event 2 (EV2)
13 Control output 1 FAIL (De-energized) Event 1 (EV1) Event 4 (EV4)
14 Control output 1 Event 1 (EV1) Event 2 (EV2) Event 3 (EV3)
15 Control output 1 Event 4 (EV4) Event 1 (EV1) Event 2 (EV2)
HBA: Heater break alarm (HBA) output
• For Position proportioning PID control, Output 1 (OUT1) is open-side output and Output 2 (OUT2) is close-side output,
regardless of the above selection.
• When Current transformer (CT) input is 2-point input, Heater break alarm (HBA) output is OR output.
• Energized or De-energized can be selected for the Digital outputs (DO1 to DO4). [Factory set value: Energized]
However, with the exception of FAIL (De-energized, Fixed).
• When using for Heat/Cool PID control, select one of set values 1 to 7.
• Invalid for a non-existing Output/Event function.
[FB400/900]
Set
value
Output 1
(OUT1)
Output 2
(OUT2)
Digital output
1 (DO1)
Digital output
2 (DO2)
Digital output
3 (DO3)
Digital output
4 (DO4)
1 Control output 1 Control output 2 Event 1 (EV1) Event 2 (EV2) Event 3 (EV3) Event 4 (EV4)
2 Control output 1 Control output 2 Event 1 (EV1) Event 2 (EV2) Event 3 (EV3)
HBA1
HBA2
3 Control output 1 Control output 2 Event 1 (EV1) Event 2 (EV2)
HBA1
HBA2
FAIL
(De-energized)
4 Control output 1 Control output 2 Event 1 (EV1)
HBA1
HBA2
Event 3 (EV3) Event 4 (EV4)
5 Control output 1
HBA1
HBA2
Event 1 (EV1) Event 2 (EV2) Event 3 (EV3) Event 4 (EV4)
6 Control output 1
HBA1
HBA2
Event 1 (EV1) Event 2 (EV2) Event 3 (EV3)
FAIL
(De-energized)
7 Control output 1
FAIL
(De-energized)
Event 1 (EV1) Event 2 (EV2) Event 3 (EV3) Event 4 (EV4)
HBA1: Heater break alarm 1 (HBA1) output HBA2: Heater break alarm 2 (HBA2) output
• When Current transformer (CT) input is 2-point input, Heater break alarm (HBA) output is OR output.
• Energized or De-energized can be selected for the Digital outputs (DO1 to DO4). [Factory set value: Energized]
However, with the exception of FAIL (De-energized, Fixed).
• To use for Heat/Cool PID control or Position proportioning PID control, select a set value from 1 to 4.
• Outputs and Event functions not specified in the model code is not valid if specified.