Specifications

Temperature Controller Driver

GP-Pro EX Device/PLC Connection Manual

 Settings of External Device

Communication setting of the external device is set with the SET, Shift, UP and Down keys located on the front

face of the temperature controller.

Please refer to the temperature controller manual for details.

 Procedure

1. While depressing the SET key, press the Shift key and hold until display mode changes from PV/SV display

mode to engineering mode.

2. Press the Up key several times to set the F60, and press the SET key.

3. Set 0 (zero) to CMP1.

4. While depressing the SET key, press the Shift key to change from engineering mode to PV/SV display mode.

5. While depressing the SET key, press the Shift key to change from PV/SV display mode to setup setting mode.

6. Press the SET key several times to select the parameter.

7. Press Up/Down keys to change the setting.

8. While depressing the SET key, press the Shift key to change from setup setting mode to PV/SV display mode.

9. Turn off power of the temperature controller and turn on again to set the setting.

 Setting value

Add1 0

bPS1 19.2

bIT1 8n1

• Parameters to be set differ per temperature controller. Please refer to the temperature controller

manual for details.