Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
207
22 SL Setting limit (Low limit)
23 T0 Proportioning cycle(OUT1)
24 XE Direct/reverse action selection
25 PF Power feed forward
26 XA Alarm 1 type selection
27 NA First alarm Energized/de-energized selection
28 OA First alarm Action selection at input abnormality
29 WA First alarm Hold action selection
2A XB Alarm 2 type selection
2B NB Second alarm Energized/de-energized selection
2C OB Second alarm Action selection at input abnormality
2D WB Second alarm Hold action selection
2E LK Set data lock level
2F LM Mode lock level selection
• Setting "Use system data area" to GP-Pro EX system area result in improper
operation. Do not set "Use system data area."
• System area setting that can be used for the temperature controller is reading area size only. Please
refer to the GP-Pro EX Reference Manual for system data area.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (Direct Access Method)"
• Please refer to the precautions on manual notation for icons in the table.
)"Manual Symbols and Terminology"
• Even if non-existing address is used, there are cases when read error is not indicated. In this case,
zero (0) is kept for read out data. On the other hand, writing error is indicated.
Address Identifier Description