Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
215
56 NB Second alarm Energized/de-energized selection
57 OB Second alarm Action selection at input abnormality
58 WB Second alarm Hold action selection
59 XC Third alarm Action selection
5A NC Third alarm Energized/de-energized selection
5B OC Third alarm Action selection at input abnormality
5C WC Third alarm Hold action selection
5D JT Power supply frequency
5E LK Setting lock No.
• Setting "Use system data area" to GP-Pro EX system area result in improper
operation. Do not set "Use system data area."
• System area setting that can be used for the temperature controller is reading area size only. Please
refer to the GP-Pro EX Reference Manual for system data area.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (Direct Access Method)"
• Please refer to the precautions on manual notation for icons in the table.
)"Manual Symbols and Terminology"
• Even if non-existing address is used, there are cases when read error is not indicated. In this case,
zero (0) is kept for read out data. On the other hand, writing error is indicated.
Address Identifier Description