Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
216
6.14 REX-P300 Series
This address can be specified as system data area.
<Communication identifier list>
Device Bit Address Word Address
32
bits
Notes
Communication identifier 0000.00-0078.1F 0000-0078
*1 *2 *3
*1 There are cases for which writing is not available depending on the device address. Check the
identifying attributes of the external device’s manual before use.
*2 When bit is written, the indicator reads the corresponding word address of external device, assign
a bit to the read word address, and return to the external device. There are cases when correct data
cannot be written if the word address is written using a ladder program, while the indicator reads
data of the external device and sends it back.
*3 32-bit device
Address Identifier Description
00 M1 Measured value(PV)monitoring
01 S1 Set value(SV)monitoring
02 O1 Manipulated output monitoring 1 (Heat side)
03 O2 Manipulated output monitoring 2 (Cool side)
04 AA First alarm monitoring
05 AB Second alarm monitoring
06 B1 Burnout
07 PS Pattern No.
08 SN Segment No.
09 T1 Time signal output No.1 status
0A T2 Time signal output No.2 status
0B T3 Time signal output No.3 status
0C T4 Time signal output No.4 status
0D T5 Time signal output No.5 status
0E T6 Time signal output No.6 status
0F T7 Time signal output No.7 status
10 T8 Time signal output No.8 status
11 EO Program end output
12 AC OUT2 action output
13 AD OUT3 action output
14 AE OUT4 action output
15 ER Error
16 TR Segment remaining time
17 RT No. of repeat execution times
18 ON Manipulated output value(MV)
19 G1 PID/AT transfer
1A XM Operation mode
1B EN Program end status
1C WT Wait status
1D HO Hold status
1E SK Step function
1F SM Search function
20 LE Segment level setting
21 TM Segment time setting