Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
217
22 PE Program end No.
23 RR Setting of the number of program execution times
24 LP Link pattern No.
25 ZW Wait zone (For fall)
26 ZX Wait zone (For rise)
27 ET Pattern end output time
28 RE Time signal output No.
29 SO Start segment
2A TO ON time
2B SF End Segment
2C TF OFF time
2D S2 FIX set value
2E PB PV bias
2F PR PV ratio
30 PW Level PID setting1
31 PX Level PID setting2
32 PY Level PID setting3
33 F1 Digital filter
34 DP Low level cut-off point
35 A1 First alarm setting
36 A2 Second alarm setting
37 XA First alarm action selection
38 XB Second alarm action selection
39 HA First alarm differential gap
3A HB Second alarm differential gap
3B TD First alarm timer
3C TG Second alarm timer
3D NA First alarm energized/de-energized selection
3E NB Second alarm energized/de-energized selection
3F P1 Proportional band 1
40 P3 Proportional band 2
41 P5 Proportional band 3
42 P7 Proportional band 4
43 I1 Integral time 1
44 I2 Integral time 2
45 I3 Integral time 3
46 I4 Integral time 4
47 D1 Derivative time 1
48 D2 Derivative tiem 2
49 D3 Derivative tiem 3
4A D4 Derivative tiem 4
4B W1 Anti-reset windup 1(ARW)
4C W2 Anti-reset windup 2(ARW)
4D W3 Anti-reset windup 3(ARW)
4E W4 Anti-reset windup 4(ARW)
4F P2 Cool side proportional band 1
50 P4 Cool side proportional band 2
51 P6 Cool side proportional band 3
52 P8 Cool side proportional band 4
53 V1 Deadband/Overlap 1 / Control motor neutral zone 1
54 V2 Deadband/Overlap 2 / Control motor neutral zone 2
55 V3 Deadband/Overlap 3 / Control motor neutral zone 3
Address Identifier Description