Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
221
6.16 REX-AD Series
This address can be specified as system data area.
<Communication identifier list>
Device Bit Address Word Address
32
bits
Notes
Communication identifier 0000.0-003B.F 0000-003B
*1 *2
*1 There are cases for which writing is not available depending on the device address. Check the
identifying attributes of the external device’s manual before use.
*2 When bit is written, the indicator reads the corresponding word address of external device, assign
a bit to the read word address, and return to the external device. There are cases when correct data
cannot be written if the word address is written using a ladder program, while the indicator reads
data of the external device and sends it back.
Address Identifier Description
00 M1 Measured-value(PV)
01 AA First alarm monitor
02 AB Second alarm monitor
03 AC Third alarm monitor
04 AD Fourth alarm monitor
05 AE Fifth alarm monitor
06 AF Sixth alarm monitor
07 AG EXCEED monitor
08 B1 Burnout
09 ER Error data
0A HP Peak hold monitor
0B HQ Bottom hold monitor
0C TM Time duration monitor
0D HR Hold reset
0E IR Interlock release
0F A1 First alarm setting
10 A2 Second alarm setting
11 A3 Third alarm setting
12 A4 Fourth alarm setting
13 A5 Fifth alarm setting
14 A6 Sixth alarm setting
15 PB PV bias
16 F1 Digital filter
17 XA First alarm action selection
18 QA First alarm interlock
19 NA First alarm Energized/De-energized
1A HA First alarm differential gap
1B TD First alarm timer setting selection
1C XB Second alarm action selection
1D QB Second alarm interlock
1E NB Second alarm Energized/De-energized
1F HB Second alarm differential gap
20 TG Second alarm timer setting selection
21 XC Third alarm action selection
22 QC Third alarm interlock