Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
235
6.22 SRZ (Z-CT) Series
This address can be specified as system data area.
Device Bit Address Word Address
32
bits
Notes
Communication identifier
01/0000.00
-01/001D.1F
01/0000-01/001D
*1 *2 *3 *4
*1 There are cases for which writing is not available depending on the device address. Check the
identifying attributes of the external device’s manual before use.
*2 When bit is written, the indicator reads the corresponding word address of external device, assign
a bit to the read word address, and return to the external device. There are cases when correct data
cannot be written if the word address is written using a ladder program, while the indicator reads
data of the external device and sends it back.
*3 Some of the identifiers are for each channel, some are for each module. As for the identifiers which
are for each channel, it is necessary to specified the channel number correctly. As for the identifiers
which are for each module, the specified channel number is meaningless.
*4
32-bit device
02/0000.00
-02/001D.1F
02/0000-02/001D
03/0000.00
-03/001D.1F
03/0000-03/001D
04/0000.00
-04/001D.1F
04/0000-04/001D
05/0000.00
-05/001D.1F
05/0000-05/001D
06/0000.00
-06/001D.1F
06/0000-06/001D
07/0000.00
-07/001D.1F
07/0000-07/001D
08/0000.00
-08/001D.1F
08/0000-08/001D
09/0000.00
-09/001D.1F
09/0000-09/001D
10/0000.00
-10/001D.1F
10/0000-10/001D
11/0000.00
-11/001D.1F
11/0000-11/001D
12/0000.00
-12/001D.1F
12/0000-12/001D
01/0000
Channel number(the setting range is 01 to 12)