Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
237
6.23 SRZ (Z-COM) Series
This address can be specified as system data area.
Device Bit Address Word Address
32
bits
Notes
Communication identifier
001/0000.00
-001/0123.1F
001/0000-001/0123
*1 *2 *3 *4
*1 There are cases for which writing is not available depending on the device address. Check the
identifying attributes of the external device’s manual before use.
*2 When bit is written, the indicator reads the corresponding word address of external device, assign
a bit to the read word address, and return to the external device. There are cases when correct data
cannot be written if the word address is written using a ladder program, while the indicator reads
data of the external device and sends it back.
*3 Some of the identifiers are for each channel, some are for each module, and some are for each SRZ
unit. Only for the identifiers which are for each SRZ unit, the channel number is meaningless. For
the identifiers which are for each channel and for each module, it is necessary to calculate the chan-
nel number according to the SRZ unit configuration correctly. The method of calculating the chan-
nel number is explained below. (Please refer to the manual of the External Device for more details.)
- Date for each module (The channel number that is assigned regardless of module type)
Channel number of communication = Module address setting + Offset value + 1
- Data for each module (The channel number for every module type)
Channel number of communication = Module address setting + 1
- Data for each channel
Channel number of communication = (Module address setting × Maximum channel number of
the function module) + Channel number in the module
*4 32-bit device
002/0000.00
-002/0123.1F
002/0000-002/0123
003/0000.00
-003/0123.1F
003/0000-003/0123
::
191/0000.00
-191/0123.1F
191/0000-191/0123
192/0000.00
-192/0123.1F
192/0000-192/0123
001/0000
Channel number(the setting range is 001 to 192)