Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
33
 Settings of External Device
Communication setting of the external device is set with the SET, Shift, UP and Down keys located on the front
face of the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. While depressing the Shift key, press the SET key to change from PV display mode to communication setting
mode.
Device address of setting item is displayed.
2. Press the SET key to display the communication item to be set.
Every time the SET key is depressed, setting item switches.
3. Press the Shift key to move to the value setting display. Press the Up/Down keys and input the setting value.
4. Press the SET key to register the input value.
5. While depressing the Shift key, press the SET key to change from communication setting mode to PV display
mode.
 Setting value
Add 0
bPS 2
bIT 0
• Parameters to be set differ per temperature controller. Please refer to the temperature controller
manual for details.