Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
35
 Settings of External Device
Communication setting of the external device is set with the SET, Shift, UP and Down keys located on the front
face of the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. While depressing the Down key, press the SET key to change from PV display mode to device configuration
setting mode.
Communication parameter group is displayed.
2. Press the UP/Down keys to display the communication parameter group “PG10”.
3. Press the SET key to display the communication item to be set.
Every time the SET key is depressed, setting item switches.
4. Press the UP/Down keys and set the communication setting.
5. Turn off power of the temperature controller and turn on again to set the setting.
 Setting value
Add 0
bPS 2
bIT 0
• Parameters to be set differ per temperature controller. Please refer to the temperature controller
manual for details.