Specifications

Temperature Controller Driver

GP-Pro EX Device/PLC Connection Manual

 Settings of External Device

Communication setting of the external device is set with the SEL, MODE, UP and Down keys located on the front

face of the temperature controller.

Please refer to the temperature controller manual for details.

 Procedure

1. Set the external device to operation STOP status.

Press the MODE key to display "Operation execution (RUN) /STOP transfer," and press the Down key to set

the mode to STOP.

2. Press the SET key to change from SV setting mode to operator setting mode.

3. Depress the SET key for 5 seconds or more to change from operator setting mode to setup mode.

4. Press the Up key to display PG24.

5. Every time the SET key is depressed, setting item switches.

Display the item to be set, and select set contents with the Up/Down keys or the Shift key.

6. Press the SET key to set the set contents.

7. Press the MODE key to display "Operation execution (RUN)/STOP transfer," and press the Up key to set the

mode to RUN.

 Setting value

Add 0

bPS 3

bIT 0

CMPS 0

• Parameters to be set differ per temperature controller. Please refer to the temperature controller

manual for details.