Specifications

Temperature Controller Driver

GP-Pro EX Device/PLC Connection Manual

 Settings of External Device

Communication setting of the external device is set with the SET, Shift, UP and Down keys located on the front

face of the temperature controller.

Please refer to the temperature controller manual for details.

 Procedure

1. While depressing the SET key, press the Shift key to change from PV/SV display mode to communication

setting mode.

2. Press the SET key and select parameters.

3. Press UP/Down keys to change the setting.

4. While depressing the SET key, press Shift key to change from communication setting mode to PV/SV display

mode.

5. Turn off power to the temperature controller and turn on again to set the setting.

 Setting value

Add 0

bPS 960

bIT 8n1

• Parameters to be set differ per temperature controller. Please refer to the temperature controller

manual for details.