Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
47
 Settings of External Device
Communication setting of the external device is set with the SEL, MONI/MODE, UP and Down keys located on
the front face of the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. Depress the SEL key for 2 seconds to change from PV display mode to engineer setting mode.
Parameter group is displayed.
2. Press the Up/Down keys to display the parameter group, "PG8."
3. Press the SEL key to display the setting item. Every time the SEL key is depressed, setting item switches.
4. Press the Up/Down keys to select the setting value, and press the SEL key.
5. Press the Monitor/Mode key to switch to the PV display mode.
6. Press the Monitor/Mode key and the SEL key at the same time to change from PV display mode to SETUP
setting mode.
7. Press the SEL key several times to display Add.
8. Press the Up/Down keys to input set value, and press the SEL key to set the input value.
9. Press the Monitor/Mode keys to switch to the PV display mode.
10. Turn off power of external device off, and turn it on again.
 Setting value
Engineer setting mode
SETUP setting mode
bPS 3
bIT 0
Add 0
• Parameters to be set differ per temperature controller. Please refer to the temperature controller
manual for details.