Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
55
 Settings of External Device
Communication setting of the external device is set with the rotary switch on the front face of the temperature
controller and the dip switch in the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. Unit address is set with the rotary switch on the front face of the temperature controller.
2. Remove the temperature controller from the mother block, and set the communication speed and data
construction with the dip switch in the temperature controller.
 Setting value
Rotary switch
Dip switch
Upper Digit Setting 0
Lower Digit Setting 0
Dip switch Setting Description
SW1 OFF
Data construction
SW2 OFF
SW3 ON
Communication speed
SW4 OFF