Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
57
 Settings of External Device
Communication setting of the external device is set with the SEL, MODE, UP and Down keys located on the front
face of the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. Set the external device to the operation STOP status.
Press the MODE key several times to display "Operation execution (RUN) /STOP transfer," and press the
Down key to set the mode to STOP.
2. Press the SET key to call up the set operator level 1.
3. Depress the SET key for 5 seconds or more to call up the set operator level 2.
4. Depress the SET key for 5 seconds or more to call up the engineer level.
5. Press the Down key several times to display PG24.
6. Press the SET key to display the set contents. Every time the SET key is depressed, item to be set switches.
7. Input the set contents with the Up/Down key, and press the SET key.
8. Press the MODE key to display "Operation execution (RUN)/STOP transfer," and press the Up key to set the
mode to RUN.
 Setting value
Add 0
bPS 3
bIT 11
• Parameters to be set differ per temperature controller. Please refer to the temperature controller
manual for details.