Specifications

Temperature Controller Driver
GP-Pro EX Device/PLC Connection Manual
75
 Settings of External Device
Communication setting of the external device is set with the SET, UP and Down keys located on the front face of
the temperature controller.
Please refer to the temperature controller manual for details.
 Procedure
1. While lifting up the stopper located at the lower section of the external device with a finger, pull and remove
it from the case.
2. Turn on the internal switch A at upper external device and put it back in the case.
3. Press the SET key to display the item to be set, and select the set contents with the Up/Down keys. Stop bit,
data bit, and parity bit are displayed in a 3 digit character string at the setting item, bIT, so touch each one's
digit, ten's digit, and hundred's digit on the SV indicator, and select the set contents with the Up/Down keys.
4. Press the SET key to set the set contents.
5. Remove the external device form the case, turn OFF the internal switch A mentioned in 2 above, and return it
to the case.
 Setting value
bPS 4800
bIT o72
Add 0
• Parameters to be set differ per temperature controller. Please refer to the temperature controller
manual for details.