Specifications

Temperature Controller Driver

GP-Pro EX Device/PLC Connection Manual

 Device Setting

To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific

Settings ] of [Device/PLC Settings ].

 Settings of External Device

Use the unit address setting switch on the front of the Temperature Controller and the DIP switch on the side of

the Temperature Controller for communication settings of the External Device.

Please refer to the manual of the Temperature Controller for more details.

 Procedure

1. Use the unit address setting switch on the front of the Temperature Controller to set the slave address.

The number added 16 to the set value becomes the slave address.

2. Use the DIP switch on the side of the Temperature Controller to set the speed, data bit configuration, and

communication protocol.

3. After completing the settings, turn ON the Temperature Controller again.

 Setting Value

Unit address setting switch

DIP Switch

Slave address setting 0

SW Settings Description

1OFF

Speed: 19200 bps

2ON

3OFF

Data bit configuration:

Data length 8 bits, no parity, stop 1 bit

4OFF

5ON

6OFF

Communication protocol:

RKC communication

7 OFF Fixed

8 OFF Fixed

• Parameters to be set vary depending on the Temperature Controller. Please refer to the manual of

the Temperature Controller for more details.