Manual

STEP 1 : Make sure you have all necessary

tools and hardware.

Hardware Kit Includes : ( all Grade 8 )

( 8 ) Bolt Plates

( 8 ) 1/2” Flat Washers

( 8 ) 1/2” Lock Washers

( 8 ) 1/2” Hex Nuts

( 8 ) 1/2” Retaining Washers

( 8 ) Allen Head Bolt - Winch Hardware

( 1 ) Package of Road Armor Logo Hardware

Step 2 : Uninstall OEM Bumper

• Park on level surface and Disconnect Positive Bat-

tery Terminal.

• Unplug license plate light and if equipped remove

back up sensors.

Look at Picture 2 on how to remove reverse

sensors.

• Use a 10mm socket and ratchet to remove the

three bolts per side that hold the bumper on.

Picture 3

• Remove OEM bumper.

Note - there are two plastic tabs on the trailer hitch

cross member that will need to be pushed out to

remove the bumper.

Picture 4

• Remove license plate lights and backup sensor in-

serts from the bumper by pushing the plastic tabs

in on the back and pushing forward.

• Pictures 5 - 6

Step 3 : Install Road Armor Bumper

• Use a 21mm or 13/16” Socket and Ratchet to re-

move the three nuts per side that hold the trailer

hitch on.

Note : do one side at a time.

Picture 7

• Install Road Armor brackets using OEM hardware

and tighten.

Picture 8

• Install Bolt tabs into the bumper and use retain-

ing washers to keep the bolt tabs from falling

out.

Note : use a deep socket to help push the retaining

washers on.

Picture 9