Installation & Assembly
ASSEMBLY INSTRUCTIONS FOR YOUR
HOPE TORCHIERE
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on level surface.
2. Install one 150W max. Type A, medium base bulb into the socket located inside shade (A).
3. Remove protective plastic from plug (C). Insert plug (C) into wall outlet.
4. Control power to lamp by using dimmer switch (B).
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will t
in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied
electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.
* Switch power off and remove plug from the wall outlet before replacing the bulb.
1878
(A)
(B)
(C)