Operation Manual

Stereo / Mono setting - FM

Your radio will play stereo FM broadcasts in stereo provided that the

received signal is of adequate strength. However, as a stereo signal

becomes weaker the audio signal will become poorer. It may be preferable

to force the radio to play the station in mono in order to reduce the level

of background hiss.

1. Press and release the On / Standby button to switch on your radio.

2. Tune to the required FM radio station as previously described.

3. Press and release the Menu button to enter the FM menu.

4. Rotate the Tuning control (Tuning buttons on remote) until 'FM Audio'

appears on the display. Press and release the Select button.

5. To switch to mono to reduce the hiss from a weak FM signal rotate the

Tuning control (Tuning buttons on remote) until 'Mono' appears on the

display. Press and release the Select button to conﬁ rm the setting.

The current audio setting will be marked with an asterisk.

6. Alternatively to return to stereo, rotate the Tuning control (Tuning

buttons on remote) until 'Auto' appears on the display. Press and

release the Select button to conﬁ rm the setting. The radio will play

the current station in stereo if the signal is sufﬁ ciently strong.

FM Audio

Mono

FM Audio

Auto

4-6