Operation Manual

Connecting Bluetooth devices

1. Ensure that the Bluetooth capability on your phone, tablet or PC is

enabled. You may need to refer to the user documentation for your

device, since the method will vary with each device.

2. Press and release the On / Standby button to switch on the radio.

3. Repeatedly, press and release the Mode button on your radio (press

the Bluetooth button on remote) until the Bluetooth mode is selected.

Your radio will show that it is 'discoverable' by ﬂ ashing the Bluetooth

indicator and showing 'Bluetooth discoverable...' on the display. The

display may change to show the time and date, but the Bluetooth

indicator will continue to ﬂ ash.

4. Using the Bluetooth settings of your phone, tablet or PC direct it to

search for 'discoverable' devices. After a few seconds, you should see

a device named 'Blutune 65'. Just occasionally it may take longer for

the radio to be found by your device.

5. Select 'Blutune 65' to cause your phone, tablet or PC to pair with your

radio and to establish a connection.

6. Once the connection is established, the Bluetooth indicator on the

display will stop ﬂ ashing and will remain lit. A message will be displayed

brieﬂ y conﬁ rming the name of the connected device.

You can now begin playing music from your smart-phone, tablet, etc.

Some Bluetooth devices may require a 'Passkey' (an authentication key)

in order to establish a link between devices. A passkey is similar to a

password, although you only need to use the passkey once to establish

a link. If your device asks for a passkey to be able to pair with your radio

then enter a code of 0000 (four zeroes).

Bluetooth

discoverable

BT connected:

Julia’s iPod tou

Magic Lantern

01:57