Operation Manual

28
Connecting and disconnecting a Bluetooth device
You can only have one Bluetooth device connected to the radio at any
one time although it may be paired with several devices. Once you have a
Bluetooth enabled device connected to your radio it cannot be interrupted
by another Bluetooth device unless you choose to break the connection.
1. To connect to a new device, press and hold the Bluetooth Pair button
(Bluetooth button on remote control) until the display shows "Bluetooth
discoverable". The Bluetooth indicator on the front panel will fl ash and
the radio will then be discoverable by other devices. The radio will
remain discoverable while the indicator continues to fl ash.
2. You may then pair the radio with the new device using its Bluetooth
settings (the radio will be listed on the device as 'Blutune 65'). The
name of the newly connected device will be briefl y shown on the radio's
display. You may then play music from the new device through the
radio.
3. To connect to a previously paired device, press and release the
Bluetooth Pair button on the radio to access the menu options. The
display will show the name of the currently paired device.
4. Then press and release the Bluetooth Pair button on the radio to
step through a list of previously connected devices. To connect to a
previously connected device, press and release the Select button
when the device's name is displayed. The radio will then connect to
the device. If automatic reconnection fails, then you will generally be
able to connect simply by selecting the 'Blutune 65' pairing in your
device's Bluetooth settings.
5. If you no longer want your Bluetooth device to be paired with your
radio you will need to delete the 'Blutune 65' pairing on the device.
Please refer to the device's Bluetooth documentation.
Bluetooth
discoverable
1
1
Switch to 1:
Julia’s iPod tou
BT connected:
Julia’s iPod tou
3,4
Note: If using the remote control to connect to a previously paired device
press and release the Bluetooth button to access the menu options. Then
use the Tuning Up or Down buttons to step through a list of previously
connected devices. To connect to a previously connected device, press
and release the Select button.
4
Switch to 2:
Janet’s iPod