Operation Manual

31
13. Rotate the Tuning control (Tuning buttons on remote) to choose the
day option and then press and release the Select button to confi rm
the setting.
• If setting alarms to daily, weekdays or weekends proceed to point 18.
14. If selecting the alarm to once you will need to set the day, month and
year options as described below.
15. Rotate the Tuning control (Tuning buttons on remote) to select the
correct day and then press the Select button to confi rm the setting.
16. Rotate the Tuning control (Tuning buttons on remote) to select the
correct month and then press the Select button to confi rm the setting.
17. Rotate the Tuning control (Tuning buttons on remote) to select the
correct year and then press the Select button to confi rm the setting.
18. The alarm volume option will show on the display. Rotate the Tuning
control (Tuning buttons on remote) to select the required volume and
then press the Select button to confi rm the setting.
19. Your radio will show 'Alarm Saved' and will exit the alarm setting
procedure.
Active alarms are indicated in the display by the alarm '
A
' symbol.
If using the alarm clock function, the alarm may not be heard if headphones
are connected when the radio is not in use.
Important: If using your iPod, iPhone or iPad as the source for the alarm,
then be sure to dock your iPod, iPhone or iPad. If the iPod, iPhone or iPad
is not detected a buzzer alarm will sound instead.
Alarm 1 Wizard
Once
Alarm 1 Wizard
Date
22- 7-2014
Alarm
Saved
A
13-18
13-18
Alarm 1 Wizard
Date
22- 7-2014
Alarm 1 Wizard
Date
22- 7-2014
Alarm 1 Wizard
Volume
07