Operation Manual

37
Setting the clock manually
Normally your radio will set its clock automatically using the DAB radio
signal. If no DAB signal is available and you need to set the time manually,
please follow the procedure shown below.
1. Press and release the On / Standby button to switch on the radio.
2. To set the clock time, press and release the Menu button to enter the
setup menu.
3. Rotate the Tuning control (Tuning buttons on remote) until 'System
Setting' appears on the display. Then press and release the Select
button.
4. Rotate the Tuning control (Tuning buttons on remote) until 'Time'
appears on the display. Press and release the Select button.
5. Rotate the Tuning control (Tuning buttons on remote) until
'Set Time /Date' appears on the display.
6. Press and release the Select button to enter the manual setting
procedure. The hour digits will then fl ash on the display.
7. Rotate the Tuning control (Tuning buttons on remote) to set the desired
hour.
8. Press and release the Select button to enter the hour setting.
9. The minute digits will then fl ash on the display. Rotate the Tuning
control (Tuning buttons on remote) to set the desired minute.
2
3-9
3-8
DAB
System Setting
<
<
System Setting
Time
<
<
Time
Set Time/Date
<
<
Set time
09:00
Set time
09:30