Operation Manual

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press and release the On / Standby button to switch on your radio.

2. Press and release the Menu button.

3. Rotate the Tuning control (Tuning buttons on remote) until 'System

Setting' appears on the display. Press and release the Select button.

4. Rotate the Tuning control (Tuning buttons on remote) until 'Factory

Reset' appears on the display. Press and release the Select button.

5. Rotate the Tuning control (Tuning buttons on remote) until 'Yes' is

highlighted on the display. If you do not wish to carry out a system

reset, highlight 'No' and then press the Select button. The display will

revert back to the previous display.

6. With 'Yes' highlighted, press and release the Select button. A full reset

will be performed. The station list and presets will be erased. Alarms

will be cancelled and sleep timer settings will be set to their default

values. The display will show 'Welcome to Digital Radio' and the unit

will behave as when ﬁ rst switched on (see page 6).

In case of malfunction due to electrostatic discharge, reset the product

using the above procedure. In some circumstances it may be necessary

to disconnect and then reconnect the mains power in order to resume

normal operation.

If a problem persists please refer to the guarantee section at the back

of this instruction book which explains how to obtain support for your

radio.

DAB

System Setting

Factory Reset

Factory Reset?

Yes

3-5

3-6