Operation Manual

48
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your radio is provided
for connecting the audio signal to an external amplifi er. Inserting an audio
cable into this socket will not mute the internal loudspeaker. Set the volume
control on the radio to minimum if desired.
Service
USB socket for software upgrade
As software updates become available software and information on
how to update your radio may be found at www.robertsradio.com
USB socket for iPhone or smartphone charging
Your radio has a USB socket which can be used for charging an iPhone
or smart phone and similar devices. This may be used to charge devices
which are not compatible with the lightning connector.
Charge time may vary and in some cases may take longer to charge than
when using the manufacturers charging unit supplied with the smart phone.
1. Ensure your radio is plugged in.
2. Connect your smart phone to the USB charging socket at the rear of
your radio.
3. Your iPhone or smart phone will begin to charge.
4. Once your iPhone or smart phone has charged remove the USB lead.
Service