Operation Manual

Operating your radio

1. Press and release the On / Standby button to switch on your radio.

When ﬁ rst switched on, the radio will be in DAB mode. After each use

the radio will remember the mode used and then switch on in that

mode the next time that it is used.

2. If the radio has been used before, the last used station will be selected.

3. If this is the ﬁ rst time that the radio has been used a scan of the Band

III DAB channels will be carried out. The ﬁ rst station in the list of

stations found during scanning will be played. The display will show

the station name.

4. During the scanning process the display will show progress of the

station search. The number on the right of the display is the number

of stations that have been found. When the scan is completed the ﬁ rst

station (in numeric-alpha order 0....9, A....Z) will be selected.

5. If no signals are found then it may be necessary to relocate your radio

to a position giving better reception. You should then carry out a scan

to ﬁ nd stations as described on page 10.

Note: When ﬁ rst switched on, the radio will set the volume to a moderately

high level, in case the broadcast is very quiet. After you have set the volume

using the Volume control, the radio will remember the setting that you

have applied for the next time that it is used.

Absolute Rad 60s

Now playing on the r

DAB Mode

Scanning... 24