SDS

Safety Data Sheet
Revision Date: 09/14/2023
SECTION 1: Identification and Company Details
Product Name: 8600 NOSE BOND
®
Stair Nose Adhesive
Product Code: 8600
Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.
Address: 300 Cross Plains Blvd.
Dalton, GA 30721
Emergency Phone: [phone] (24-hour Response / CHEMTREC)
Product Information: [phone]
Recommended Use: Adhesive
SECTION 2: Hazard(s) Identification
Classification of the
substance or mixture: This product is not classified as hazardous under GHS criteria.
SECTION 3: Composition / Information on Ingredient Weight % CAS #
Marble Dust 34.3% 1317-65-3
Naphthenic Oil 10.0% 64742-52-5
Urea 4.0% 57-13-6
This product is an encapsulated mixture which reduces the likelihood of exposure to hazardous particulates. Airborne exposures to
hazardous dusts or mists may be generated by spraying, sanding or grinding. During normal usage of the product as recommended,
airborne dusts will not be present
SECTION 4: First-Aid Measures
Inhalation: Move victim to fresh air. Consult physician if necessary.
Skin Contact: Wash with soap and water. Remove contaminated clothing. Consult physician if necessary.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. Consult physician if necessary.
Ingestion: Do not induce vomiting. Wash mouth with water. Consult physician.
Note to Physician: Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic steroid preparation. Skin:
Treat symptomatically as for contact dermatitis or thermal burns. If burned, treat as thermal burn.
Ingestion: Treat symptomatically. There is no specific antidote. Inducing vomiting is contraindicated
because of the irritating nature of this compound. Respiratory: Treatment is essentially symptomatic.
Remove individual with symptoms from exposure and assist in breathing if necessary.
SECTION 5: Fire-Fighting Measures
Extinguishing Media: This product is not flammable. Use fire- extinguishing media appropriate for surrounding materials.
Hazardous Combustion Products: No particular hazards known.
Protection of Firefighters: Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
SECTION 6: Accidental Release Measures
Personal Precautions: Use protective gloves, goggles and suitable protective clothing.
Environmental Precautions: Do not allow product to get into drains, soil, or surface water.
Methods of Clean-up: Small spillages: Absorb with sand or other inert absorbent. Large spillages: Dam and absorb.
Collect spillage in containers, seal securely and deliver for disposal according to local regulations.
Wear necessary protective equipment.
Page 1 of 4