Product Overview

C84
THERMOCOUPLES & PILOTS
UNI-LINE INCLUDES PG9 CONNECTION
ORDER NO. LENGTH PILOT ADAPTOR TYPE
1950-001 36" • TWO LEAD
1950-002 48" •
1950-003 60" •
1950-018 18" •
1950-518 18"
1950-532 36"
1950-548 48"
1950-560 60"
1951-001 36" •
1951-536 36"
1951-560 60"
1950 & 1951THERMOPILES
The 1950 and 1951 Thermopiles (pilot generators) are designed for use on
self-powered gas control systems. They can be used to replace all
Robertshaw and similar competitive devices. Models are available for two
lead or coaxial type connection. All models include mounting nuts.
1970UNI-COUPLES
®
20 TO 30 MILLIVOLTS
The 1970 Series Uni-Couple's unique design allows for installation to virtu-
ally all pilot burners. The versatile zip nut may be pushed, pulled or thread-
ed onto the thermocouple's rolled threads for proper positioning in every
application. The stainless steel tip (longer life), extended cold junction
(greater voltage output potential), copper tube (corrosion protection with
low electrical resistance), and lock washer equipped coaxial connection
(resists loosening due to vibration or changes in ambient temperature) make
the Uni-Couple the single most versatile thermocouple available today.
1970 SERIES
UNI-LINE UNI-LINE
ORDER NO. LENGTH ORDER NO. LENGTH
1980-012 12" 1980-036 36"
1980-018 18" 1980-048 48"
1980-024 24" 1980-060 60"
1980-030 30" 1980-072 72"
1980SNAP-FIT
®
THERMOCOUPLES
The 1980 Series Snap-Fit Thermocouples offer easy installation into the
majority of pilot burners. Both slim and standard thermocouple types are
available in the 1980 Series without complicated adaptors, but with the
extra insulation from high ambient temperatures that the brass sheath offers
when needed. The 1980 is constructed of the same materials as used in
the 1970. See copy above.
UNI-LINE UNI-LINE
ORDER NO. LENGTH ORDER NO. LENGTH
1970-001 * 1970-036 36"
1970-018 18" 1970-048 48"
1970-024 24" 1970-060 60"
1970-030 30" 1970-072 72"
* Assorted ten-pack kit includes 1-18", 4-24", 4-26" and 1-48".
250 to 750 MILLIVOLTS
PG9 ADAPTOR IS
AVAILABLE
SEPARATELY
COAXIAL
1960-027LOW MASS THERMOCOUPLE
The 1960-027 is a special low-mass or quick dropout thermocouple. It is
usually found on applications that require an oxygen depletion system on
the thermo safety. Also found on many L.P. gas applications that require a
quick dropout of the thermo safety if there is a loss of pilot flame.
NOTE: Has standard thermocouple threads, WILL NOT fit applications
with metric threads.
UNI-LINE
ORDER NO. LENGTH
1960-027 27"
1960-027
1950-001
1980 SERIES
ORDERING DATA
ORDERING DATA
ORDERING DATA
ORDERING DATA