Technical data

1.1 DIMENSIONS
(
(Overall) mm
Height 595
Width 500
Depth 140
Forward Projection 90 (Desire 65)
Height to top of flue aperture 504
1.2 INPUTS AND PRESSURES
Natural Gas
Maximum Heat Input 6.5 kW (GROSS) 22178 Btu/h
Maximum Heat Output 4.0 kW 13648 Btu/h
Efficiency Class II
Supply Pressure 20.0 mbar 8.0 in wg
Setting Pressure 16.8 mbar ( ± 1 mbar) 6.5”w.g ( ± 0.4 in wg)
1.3 BURNER AND CONTROL DETAILS
Main Burner SP988930
Pilot Burner SP822468
Injector (Main Burner) SP822469
Spark Gap 3.0mm to 5.0mm
Manual Control SP822395
Slider Control SP822596
Battery (Slider option) 9V PP3
Contemporary, Charisma, Classic & Desire)
1.1 GENERAL INSTALLATION REQUIREMENTS
In your own interest and that of safety, it is the law that all gas appliances are installed by competent persons in accordance with the
current Gas Safety (Installation and Use) Regulations. Failure to install appliances correctly could lead to prosecution.
The installation MUST be in accordance with these installation instructions, all the relevant parts of the Local and National Building
Regulations or Building Standards (Scotland) (Consolidation) Regulations and the relevant recommendations of the current editions of
the following British Standards:
B.S. 5871 : Part 2 B.S. 715
B.S. 5440 : Parts 1 and 2 B.S. 1251
B.S. 6891 B.S. 1289
B.S. 6461 : Parts 1 and 2 B.S. 1289 : Part 1
B.S. 1289 : Part 2
Any other relevant British Standard Code of Practice and/or Local Building Regulations and in accordance with the rules in
force.
This appliance must be installed in accordance with the rules in force, and used only in a sufficiently ventilated space.
Consult instructions before installation and use of this appliance.
1.0 INTRODUCTION
2.0 TECHNICAL DATA
3
NO COMPONENT OF THIS FIRE IS MANUFACTURED FROM ASBESTOS OR ASBESTOS RELATED PRODUCTS.
This appliance is an open fronted inset live fuel effect gas fire, it is suitable for use with Brick Chimneys(including lined), twin walled or
insulated Metal/Pre-fabricated Flues of 125mm minimum diameter and Flueboxes conforming to the constructional requirements of BS
715 and Pre-Cast Flue applications. It is fitted with a combined flame supervision and oxygen depletion monitoring device. The fire is for
hearth mounting only on a non-combustible hearth. If required the fire can be fitted using a 152mm (6”) rebated surround if it is to be
installed in a pre-cast flue (optional extras are required).
D269 - SuperEco range of I.L.F.E. Gas Fires (Contemporary, Charisma, Classic & Desire).
The efficiency of this appliance has been measured as specified in BS 7977-1:2002 and the result is 61.5%. The
gross calorific value of the fuel has been used for this efficiency calculation. The test data from which it has
been calculated has been certified by Notified Body No. 0087. The efficiency value may be used in the UK
Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.
The above exceeds the minimum requirement of 45%.