Replacement Part List

19
6.2.1.3.1 SUB-ZONE
To set a sub-zone:
1. Click the Sub-Zone area. If the mower is in the base station, it gives a signal that it is departing from the base.
Shortly afterwards, it departs from the base and starts driving along the wire without activating the mowing
motor(s).
While Robomow is driving to the sub-zone entrance, the app window looks like this:
2. Follow the mower while it is driving along the edge.
3. When the mower is well inside (at least 1-2 meters) the desired sub-zone, press the red Stop button on the app.
This sets the point where the mower will leave the edge and start mowing the sub-zone during actual mowing.
After pressing Stop in the app window, Robomow stops and a new window appears.
4. Specify the size of the sub-zone, using the controls to select the size.
5. Click Save when finished. The sub-zone programming is now complete.