Replacement Part List

Important!

When the Islands feature is set to On, the mower executes a special method of searching for the Base Station. As

a result it may take the mower a longer time to arrive at the Base Station.

6.2.1.5 NEAR WIRE FOLLOW

Using this option you can define how closely Robomow follows the perimeter wire on its way to the base station. You can

set this option for each zone separately.

You can set the following:

 Max. Distance - sets how far Robomow may go from the wire while riding back to the base station.

 Min. Distance - sets how close Robomow may get to the wire while riding back to the base station.

Note that the numbers do not represent the actual units of measurement.

Turn this option on and off per zone by setting the controller to "ON" or "OFF".

6.2.1.6 EXTERNAL BASE

Note: This option is only available for C-models (RC / MC).

Using the External Base option, you can set up an off-the-lawn installation of a base station.