Replacement Part List

1. Before using this option, make sure the external charging station was installed correctly. Refer to the Operating

Manual for the installation instructions.

2. Select the zone in which the external charging station is located – the Main Zone, or if relevant, a Separated Zone.

3. Enable or disable the External Base option by setting the controller to "ON" or "OFF".

4. Specify the distance of the base station from the edge using the Distance slider. This specifies how far (in

meter/feet) Robomow should drive back when departing from the base.

6.2.2 CHANGING “MOWER OPTIONS” VIA ROBOMOW APP

To change the mower options:

1. Press the "Menu" button on the home screen of the Robomow app. The main menu appears, as shown in the

image below.

2. Click Lawn Mower & Options. A new window appears with all the options that can be set for your lawn as well as

for your Robomow.