Replacement Part List

27
9 GSM MODULE
The main purpose and value of the GSM accessory is the ability to send alerts by push notification to the mower’s owner. The GSM
Module itself provides an Internet data connection, but the push notifications mechanism requires registering a mobile device as a
push notifications recipient. This is where the Robomow App comes in.
The GSM Module can send two types of alerts (push notifications) to your mobile device:
- Theft Detect Alerts - Sent if your mower has been removed from the designated area.
- Operation Stop Alerts - Sent if your mower has stopped in the middle of an operation.
9.1 SETTING THE TYPE OF ALERTS TO BE SENT BY THE GSM MODULE
To set the type of alerts sent by the GSM module:
1. Navigate to Main Menu  Lawn & Mower Options  Mower  Mobile Comm. System.
2. Select the type of alerts that will be sent to your mobile device by your Robomow mower:
- Theft Detect Alerts - Sent if your mower has been removed from the designated area.
- Operation Stop Alerts - Sent if your mower has stopped in the middle of the operation. The alert is sent two hours
after the mower stops operation.
You can also switch on the Share Operational Data option in Main Menu  App Settings to enable the sending of operational
data from your Robomow to a centralized Support Center in order to improve performance.
9.2 TESTING YOUR GSM MODULE
If the GSM Module is replaced or suspected of not functioning properly for any reason, we recommended testing it.
1. Navigate to Main Menu  Lawn & Mower Options  Mower  Mobile Comm. System  GSM Module Settings.
2. Press Test.
 If the GSM passes the test, a “GSM Test Passed!” message is received within a couple of minutes.
 If the testing process fails, please try again, or contact your nearest Robomow service provider.