Specifications

Communicating with the Courier 3-7
Mac OS
Be sure you’re using a hardware handshaking cable to connect
the Courier to the Macintosh. Also, if you won’t be using
AppleTalk Remote Access (ARA), then set AppleTalk to Inactive
(in Chooser). Otherwise ARA may interfere with your
communcations software.
As a general rule, set DIP switches 1, 3, 5, and 8 ON, and use
AT&F1 as your modem initialization string.
For instructions about how to set up your Macintosh
communications software package, call our fax-on-demand
service (at 800-762-6163 or 847-676-1598) and request document
10000 for a list of available documents. Or, call our Macintosh
BBS (at 847-676-1598).
Windows NT
As a Client
If you want only to dial out using the Courier, Windows NT
works very much like Windows 3.x. Windows NT ships with a
built-in Terminal program that can support speeds of up to 115.2
Kbps.
Additionally, Windows NT includes a Remote Access Dialer, but
it is not installed by default.
You can install Quick Link II in Windows NT but you may
experience problems with fax operations.
As a Server
Here’s how to set up Windows NT Remote Access Service (RAS)
to recognize the Courier. First, you must install RAS, which is
included with Windows NT but is not installed by default.