Specifications

Communicating with the Courier 3-11
Testing the Courier
Use any communications software package for this test. Quick
Link II Fax is used as an example.
Quick Link II Fax
1
Install and then start Quick Link.
2
Click Setup | Line Settings… Make the following settings.
If you are using a computer with a serial port that cannot
support high speeds, choose 19200. Then click OK.
3
Click Setup | Modem Setup… Select the Comm. Port to
which the Courier is attached. Click OK.
4
In the terminal window, type AT <Enter>. The Courier
should respond OK.
5
Dial the U.S. Robotics BBS at [phone]. For example,
ATDT18479825092 <Enter> dials the U.S. Robotics BBS as a
long-distance call.