TV WALL MOUNT RF-TVMLPT03V3 ASSEMBLY GUIDE Before using your new product, please read these instructions to prevent any damage.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RF-TVMLPT03V3 Specifications Maximum TV weight: 130 lbs. (58.9 kg) Screen size: 32" to 90" diagonal Overall dimensions (H × W × D): 17.4 x 26.5 x 2 in. (44.2 x 67.3 x 5 cm) Wall-mount weight: 6 lbs. (2.7 kg) 26.5" (67.3 cm) 17.4" (44.2 cm) • • • • Need help? Call 1-800-620-2790 (U.S.
Tools needed You will need the following tools to assemble your new TV wall mount: Level Pencil Edge-to-edge stud finder Drill Phillips screwdriver 7/32" (5.
RF-TVMLPT03V3 TV hardware bag Lbl E F G Hardware M4 × 12 mm screw M4 × 35 mm screw M4 washer Qty Lbl Hardware Qty 4 M M8 × 16 mm screw 4 4 N M8 × 20 mm screw 4 4 O 4 M8 × 25 mm screw M6/M8 washer H 4 P 4 M8 × 35 mm screw 22 mm spacer I 4 Q 4 M8 × 45 mm screw 2.5 mm spacer J 4 R 4 M8 × 50 mm screw K L M6 × 12 mm screw M6 × 35 mm screw 4 S 4 T Lag bolt washer 5/16" × 2 3/4" lag bolt Need help? Call 1-800-620-2790 (U.S.
Concrete Installation Kit CMK1 (not included) Contact customer service at 1-800-359-5520 to have these additional part shipped directly to you. U 4 Concrete anchors (Fischer UX10 x 60R) Installation instructions STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back 1 2 3 4 5 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. If your TV has a table-top stand attached, remove the stand.
RF-TVMLPT03V3 • Irregularly-shaped back: There is a gap between the brackets and some part of the back of your TV. You will need spacers (I or J) when assembling the wall mount. 6 Remove the TV brackets (B and C). Need help? Call 1-800-620-2790 (U.S.
STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand threading the screws.
RF-TVMLPT03V3 STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back You’ll need Screws or Washers or E (4) K (4) or or M (4) N (4) G (4) or Level Phillips screwdriver (B and C) TV brackets O (4) 1 2 3 H (4) Align the holes you noted on the TV brackets (B and C) with the screw holes on the back of your TV. The brackets are marked “R” for the right bracket and “L” for the left bracket. Make sure that the brackets are level.
STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You’ll need Washers Screws or or F (4) or L (4) P (4) G (4) H (4) or Q (4) R (4) (B and C) TV Brackets Phillips screwdriver 1 2 3 I (4) Level Align the TV brackets (B and C) with the screw holes on the back of the TV.
RF-TVMLPT03V3 STEP 4 - Determine wall-mount location You’ll need Pencil Measuring tape Notes: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder • Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches from the ground. The center of your TV will match the center of the wall plate (A).
4 Use a pencil to mark this spot on the wall. aA bB 12 Need help? Call 1-800-620-2790 (U.S.
RF-TVMLPT03V3 STEP 5 - Option 1: Installing on a wood stud wall You’ll need Top Dessus Parte superior Lag bolt (T) (4) Top Dessus Parte superior RF-TVMLPT03V2 Template • Gabarit • Plantilla Tools Needed Outils nécessaires Herramientas requeridas Note: For wood frame installations, use a stud finder to locate wood studs first. Remarque : Pour une construction à ossature de bois, localiser d'abord les montants en bois, à l'aide d'un détecteur de montants.
Center pencil mark made in Step 4. Top Dessus Parte superio r Tools Needed Outils Herramie nécessaires ntas requerida s Note: For locate wood frame wood installat Remarq studs st. ions, use a stud localiser ue : Pour une nder to détecteud'abord les construction à ossature r de montanmontants Nota: en bois, de ts. para à l'aide bois, de madera la instalac d'un ión en con un , primero construc localizad debe localizar ciones or de vigas.
RF-TVMLPT03V3 STEP 5 - Option 2: Installing on a solid concrete or concrete block wall You’ll need Lag bolt (T) (4) Level 1/2" socket wrench Concrete Anchor U (4) Pencil Hammer S (4) Wall plate (A) Top Dessus Parte superior Note: For wood frame installations, use a stud finder to locate wood studs first. Remarque : Pour une construction à ossature de bois, localiser d'abord les montants en bois, à l'aide d'un détecteur de montants.
3 in. (75 mm) Top Dessus Parte superio r Tools Needed Outils Herramie nécessaires ntas requerid as Note: For locate wood frame wood studs installations, Remar st. use a stud que localise : Pour une er to r détecte d'abord les construction ur de montanmontan à ts en bois,ossature de Nota: ts. para à l'aide bois, de madera la instalac d'un ión en con un , primero constru debe localiza cciones dor de localizar las vigas de armazón vigas.
RF-TVMLPT03V3 STEP 6 - Attach your TV to the wall mount • Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the right and left TV brackets (B and C) over the upper lip of the wall plate (A). Then, gently lower the TV until the lock engages the lower lip of the wall plate (A). You will hear a click when the TV locks into place. HEAVY! You will need assistance with this step.
STEP 7 - Adjusting the tilt angle You’ll need Phillips screwdriver 1 2 Adjust the swivel tension by hand or by using a 3/16" hex key (not included), then adjust the tilt angle by gripping the top and bottom of the TV and manually moving the TV to the angle you want. When you are done adjusting the tilt tension, retighten the knob, but do not over-tighten. Tighten the swivel tension after the adjustments have been made.
RF-TVMLPT03V3 Removing the TV from the wall mount • Pull the latches down to unlock the TV from the wall mount, then pull the bottom of the TV out from the wall and lift it up and off the wall plate. For customer service, call: 1-800-620-2790 (U.S. and Canada) Need help? Call 1-800-620-2790 (U.S.
LIFETIME LIMITED WARRANTY Definitions: The Distributor* of Rocketfish branded products warrants to you, the original purchaser of this new Rocketfish-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for the Product Warranty Period. For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.
RF-TVMLPT03V3 • • • • • • Damage due to weather, lightning, and other acts of God, such as power surges Accidental damage Misuse Abuse Negligence Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home.
Part # 6907-302067 www.rocketfishproducts.com 1-800-620-2790 (U.S. and Canada) ROCKETFISH is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.