Owner's Manual

BASIC OPERATION
Power·
ON/OFF (1)
Press this button to turn
unit
ON
or
OFF.
SEL-
Function
Select
Button
(2)
Press the "SEL" button
repeatedly
to scroll through the functions
BAS>
TRE
>FAD>
SUB>
DSP
>REAR
ZONE
(SOURCE)>
REAR ZONE (VOL). Once desired function is selected,
use the VOL buttons to change the setting value.
Press and hold the SEL button to
enter
zone selections.
Short
press the SEL button
repeatedly
to scroll through the
Zone:
America/China/Europe
Beep:
Activates
Beep
On/Off
Clock:
12/24
hour
format
TRI1:
Activates
Trigger
1
On/Off
(Switched 12V). This
trigger
is set to "ON" by default.
TRI 2:
Activates
Trigger
2
On/Off
(Switched 12V). This
trigger
will need to be reactivated
if
unit is
disconnected
from
power
source.
VOL-
Volume
Up/Down
(3)
Press the UP
arrow
button to turn the volume up to the desired listening level.
Press the DOWN
arrow
button to turn the volume down to the desired listening level.
MODE
button
(4)
Short press the "MODE" button to switch through modes: FM/AM > AUX1 > AUX2
>SIRIUS>
BT >
USB>
SD
>CDC
Long press the "MODE" button to switch through REAR ZONE options: R ZONE
Source>
R ZONE Volume.
DISP-
Display
Button
(5)
Press the "DISP" button to toggle the system time
On/Off
on the LCD.
Adjusting
Time
(Clock)
Press and hold the "DISP" button until the
hour
digit
starts to blink, use the
~I
11.-
to
adjust
hour.
Once
hour
is set, press "DISP" again to
adjust
minute using the
~I
11.-
buttons.
Adjusting
backlight-
MENU (16)
Press the "MENU" button
for
more the 2
seconds
to adjust the
backlight
brightness
on the LCD.
(25o/o,
1
00°/o)
Low
Voltage
Warning
When the
vehicle's
power
supply
drops
below 10 volts, the LCD will
display
"BATTERY LOW" and
the system will beep
for
1 minute. The black box will turn
off
automatically
after
the 1 minute period.
Locking
the
Control
Panel
To
lock
the RFX-MRSBB control panel, press and hold "SEL" and "DISP" buttons
simultaneously
for
3 seconds. The black box will not respond when button are pressed on the control panel. Press and
hold "SEL" and "DISP" buttons
for
3
seconds
to unlock the control panel.
Rear
Zone
Operation
The
purpose
of
this
feature
is
to
take
advantage
of
playing
dual
media
sources
simultaneously.
Each
zone
has
the
ability
to
have
its own
media
source
along
with
independent
volume
control.
These
functions
can be
accessed
through
the
RFX-MRSBB
control
pa·nel
or
through
wired
remote
connections.
Audio
Source
Long
press
the
"MODE"
button,
select
REAR
ZONE
Source.
Use the
Volume
buttons
to
scroll
through
available
sources.
Press
"SEL"
to
select
source
for
audio
playback.
Audio
Source
Volume
Long
press
the
"MODE"
button,
select
REAR
ZONE
Volume, use the
"VOL
Up" and
"VOL
Down"
buttons
to
increase
and
decrease
the
volume
to a
desired
level.
Note:
Please
note
if
the.
USB/SO
mode
is
playing
in
the
front
zone, the
SO/USB
mode
cannot
be
selected
in
the
rear
zone.
PS