Owner's Manual

SiriusXM OPERATION
SCAN(9)/MENU
(16)
Channel
Scanning
Short
press
SCAN button to scan
all the
channels. The unit
will
keep on scanning
every 5 seconds
per
channel until you press the SCAN button again to stop scan
function.
Channel
Category
Mode
Short
press MENU button to
enter
category
mode while "CAT ON" will
show
in the
screen
field,
when
short
press again, the
category
setting will
be off, and
"CAT OFF"
will
show.
PARENTAL
CONTROL
You can
lock
any
SiriusXM
channels
you do not
want
others
to have access
without
your
permission. The
default
code is
"5220". In
case you
forget
your
code
please
execute
the
default
reset operation
or
disconnect
the unit
completely
from the
battery
to resume the
default
code.
e
GUIDE ON
HOW
TO
ENTER
THE
CODE
USING THE
VOLUME
BUTTON
When the
first
character
is flashing, Press the Volume up and down
butt~ns
to
select
5 and press SEL
key to
enter
then the second
character
flash. The same operation to
select
the rest
character
"2","2","0".When
done, press
SEL
key
to confirm.
e
TOLOCKACHANNEL
.
Select
a channel
that
you wish to
lock
then long
press SCAN button
-"CH
LOCKED"
will
show on the display.
Enter
the code then press
SEL
key
to confirm
-"Channel
Locked" will
show
on the
display
e
TO ACCESS
A
LOCKED
CHANNEL
You can
access
a locked channel by
channel
browsing
method
or
direct
tunning
method, you are
requested to
enter
the
passcode
before
access
the
locked channel.
The content metadata(Artist
Nme/Song Title/Content
Info) would
not allow
to be
displayed
when you browse to a
locked channel
without enter the passcode.
e
TO
UNLOCKACHANNEL
Select
the locked channel
that
you wish to
unlock
then long press
SCAN
button-
" UNLOCK CH"
will
show
on the display.
Enter
the
code then press
SEL
key
to confirm
-
"Channel
Unlocked"
will
show
on the
display
e
TO
CHANGE
THE
CODE
Press and hold
MENU Button
-"OLD
CODE" will
show
on the display.
Enter
the old
code then press SEL
to confirm
-"NEW
CODE" will
show
on the display.
Enter
your
new code then press SEL
again to confirm
-"SETCODE
OK" will
show
on the display.
e
LOCKEDCHANNELMANAGEMENT
When you
want
to browse
all the locked channels, press and
hold "MODE"
button
and
"1"
button
simultaneously
to
enter
the locked channel browsing mode. You can
browse the entire
locked
channel by pressing the
Volume
up and down buttons
after
entering the
correct
passcode.
Select
a locked channel and press
SEL
key
if
you
want
to
clear
that
locked
channel.
To
clear
all the locked channels except the enable
Mature channels ,
just
press the Volume up and down buttons
until the
advisory
"CLEAR
ALL
LOCKED"
display, then
P8