User's Manual

PROGRAMMABLE OPTIONS Cont.

18. DIESEL GLOW PLUG DELAY:

This option is used to set up Diesel Mode. By using this option, you can control whether the unit monitors the

vehicle’s glow plug circuit using the Pink input wire or has a fixed 10 second delay. The Diesel Glow Plug Feature is

OFF by default and must be programmed before use. There are 4 choices for this option:

1. Gasoline Engine - Default.

2. 10 Second Delay - Provides a solution for diesel vehicles without having to connect to the Glow Plug “Wait to

Start” input. This may be due to a variety of reasons for example: If your vehicle does not have a viable “Wait

to Start Circuit” or you cannot locate and identify the circuit.

3. (+) Glow Plug – Pink Input Wire must be connected to a positive “Wait to Start Light” (120 second max delay).

4. (-) Glow Plug – Pink Input Wire must be connected to a negative “Wait to Start Light” (120 second max delay).

19. MAXIMUM CRANKING TIME:

This option controls the Maximum starter cranking time. There are up to 3 start attempts. There are 4 choices for

this option:

1. 0.8 seconds - Default. Adds 0.2 seconds each additional attempt (for Tachless Mode).

2. 1.2 seconds - Adds 0.2 seconds each additional attempt (for Tachless Mode).

3. 1.6 seconds - Adds 0.2 seconds each additional attempt (for Tachless Mode).

4. 3.6 seconds – Maximum Cranking Time. Auto selected in Tach Learn Mode and Hybrid Mode.

20. DOOR LOCKS:

This option sets how the door lock circuit works. There are 4 choices:

1. 0.8 Second Lock and Unlock - Default.

2. 3.5 Second Lock and Unlock - For older European vehicles that require a long lock and unlock pulse to

operate Vacuum door lock systems.

3. Double Unlock – This feature may be required to interface with a factory alarm or keyless entry system. The

first pulse disarms the factory alarm; the 2

pulse unlocks the doors.

4. “Wake Up” pulse on Unlock - 0.8 second unlock with Ignition pulse to wake up a BCM. This is also called

“SLAM LOCK” This feature may be required to interface with a factory alarm or keyless entry system.