User's Manual

PROGRAMMABLE OPTIONS Cont.

21. REMOTE START ENGINE RUN TIME:

You can set the engine run time for 20, 15, 10 or 3 minutes as desired. Some cities have an unattended vehicle Run

Time Limit. Check your local laws. The Default = 20 minutes.

22. CHIRPS WITH REMOTE START ACTIVATION:

This option controls whether the system gives 3 short Siren and Horn Chirps when activating remote start.

23. TURBO TIMER: Using Remote Start Button

The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1, 3

or 6 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without

the need for expensive turbo timers. The Default = OFF.

24. IDLE DOWN:

This feature allows the remote starter to take over operation of a parked vehicle when the ignition key is removed

and you exit the vehicle. The vehicle will remain running for the programmed time or until canceled. The choices

are: 15, 30, 45 minutes or Infinity Run. The Default = 15 minutes.

25. LOCK WITH REMOTE START and REMOTE START ABORT:

This option controls whether the unit will automatically lock during and after a remote Start abort or time-out. There

are 4 choices for this option:

1. Lock with Remote Start and Lock / Arm with Remote Start Abort - Default.

2. OFF

3. Lock with Remote Start Only.

4. Lock / Arm with Remote Start Abort only

26. TRANSMISSION TYPE: Requires Tach Wire connected and programmed

This option selects automatic or manual transmission mode

1. Automatic Transmission – Default.

2. Manual Shift Transmission - Requires Remote Start Button pressed with (-) Hand Brake Activated.

3. Manual Shift Transmission – Starts Exit procedure with (-) Hand Brake Set and engine running.