User's Manual

DATA PORT
This unit includes DP Technology that will allow you to directly Plug-In our Data Port Bypass Modules. There are 2 types of
Protocol, OFA series and SL series modules. The default is set for SL series Protocol. Please refer to Databus
module manual for detail instructions. The Data Port Protocol must be programmed for the correct module.
See Option # 7 on page 24 for programming Data Port
Some vehicles require a Databus Module to Bypass the factory Immobilizer and operate the keyless entry
Databus modules are used to communicate with the vehicles computer at the OBD2 Data connector or Canbus
wires. This reduces installation error. Crimestopper Systems with DP Series have a direct Data Port Plug-In for the
Databus bypass module. This eliminates conventional wiring between the Alarm/Remote Starter and the bypass
interface module.
Features Include
• Transponder Immobilizer.
• PassLock Immobilizer.
• O.E.M. Alarm Control.
• R.A.P. Shutdown.
• Power Door Locks.
• Priority Unlock.
• Trunk Release.
• Parking Lights.
• Courtesy Lights.
• Brake Pedal and Hand Brake
• Hood, Door and Trunk Status
• Tachometer.
• Heated Seats.
• Rear Defrost.
• Driver 1 and 2 Memory presets.
The actual features controlled depend on the vehicle and Databus module.