User's Manual

7. Arm without ZONE

1. Arm bypass sensor 1

Press button , once to set arming, siren chirp, parking lights flash once,

Sensor 1 will be bypassed. Sensor 2 is normal

2. Arm bypass sensor2

Press button , once to set arming, siren chirp, parking lights flash once,

Sensor 2 will be bypassed. Sensor 1 is normal

3. Arm bypass sensor1 and sensor2

Press button , once to set arming, siren chirp, parking lights flash once,

Sensor 1 and Sensor 2 will be bypassed.

4. IDLE DOWN

While engine is running and the key at ignition ON position press button , parking lights flash,

transmitter sounds. Then get out ignition key (engine goes on running!). Press button system will

chirp once, parking lights flash once. Engine will be running 15, 30, 45 or unlimited time period (according the

program features 24) then shut down and system. Shock sensor is bypassed at this period.

Press button hold 2 sec to shut down engine. Parking flash once for confirm.

Engine also shut down when alarm.

5. Auto rearm

System will be rearm and relock if ignition key doesn’t turn on within 30 seconds after disarmed. It’s

programmable function – see program features 05.

6. Passive arming / Arming reminder

If passive arming function is on, arming reminder automatically disabled.

Ignition is off after driving, open the door, leave out and close it. the system will automatically armed after

30 sec. Passive arming still no lock door. It’s programmable function – see program features 06

If passive arming function is off, arming reminder automatically enabled.

Ignition is off after driving, open the door, leave out and close it. Customer leave car without arming. After

15 sec. should give 4 chirps once to remind customer has not armed the system. After warning chirps not do

anything.