User's Manual

12
7. Two-Stage unlock
Press button will unlock driver’s door only. Hold button for 2 seconds or press button
twice (see program feature 10), will unlock the passenger’s doors (activate “2
nd
stage Unlock Output”).
If programmed.
8. Lock
Press button will lock the doors.
9. Unlock
When system is disarmed and ignition key is on, press button will unlock the driver’s door. Hold
button will unlock the passenger’s doors (activate “2
nd
stage Unlock Output”).
10. Lock / Unlock door upon ignition
If this function programmed (program feature 02) car’s doors lock automatically when ignition turn on and
unlock when ignition turn off.
After all doors are closed, the door will be locked automatically upon first footbrake.
11. Car finder
When system is armed, press button
simultaneously one time, siren will chirps 6 times and parking
lights flash 6 times.
12. Channel 1 (Trunk Release)
Push and hold button , will keep output till release the button.. When system armed shock sensors and
trunk trigger will bypass until 10 sec after trunk closed. (See program feature 10)
13. Channel 2 (2
ND
UNLOCK)
Press button will unlock driver’s door only. Hold button for 2 seconds or press button
twice (see program feature 11), will unlock the passenger’s doors (activate “2
nd
stage Unlock Output”).
If programmed.
Press and release button , then press button in 3 seconds to activate channel 2, remote
Output pulse time of channel 2 is programmable function (program feature 11).