User's Manual

17
28. Programming functions
1. Turn Key to the ON position
2. Press program / valet button 5 times. After a few seconds the unit will flash the Parking lights and siren
chirps 5 times
3. Push the valet program button [again] the number of times that corresponds to the option number desired
(1-20X). You must get a light flash after each button press. See chart on next page for option list.
Exit feature programming: After 20 sec or turning off ignition system will get out the feature programming
setting procedure, parking lights flash 4 times.
Option #
Option
Description
TX Button #1
Factory
Default
TX Button #2 TX Button #3 TX Button #4
1
Engine
Monitoring
Tachless Low
Level
Tachless High
Level
Engine R.P.M.
(Tach)
Hybrid Mode
2
Auto lock with
Ignition
Ignition ON =
Lock
Ignition OFF =
Unlock
OFF
3
Open Door
Warning
45 Sec. Delay 30 Sec. Delay 15 Sec. Delay 0 Sec. Delay
4
Horn Honk
Output
Arm/Disarm/W
arning/Trigger
Warning and
Trigger
Trigger Only
5
Auto Rearm /
Active Rearm
OFF
Auto Rearm
with Lock
Auto Rearm
without Lock
Active Rearm ON
6 Passive Arming
OFF with No
Reminder
Chirps
Passive Arm
with Lock
Passive Arm
without Lock
OFF with
Reminder Chirps
7
Data Port
Protocol
SL Series OFA Series
8 Siren Output
Arm/Disarm/W
arning/Trigger
Warning and
Trigger
Trigger Only
9
Pink/White Wire
Selection
IGN 2 ACC 2 START 2
10
Channel 1
Output
(Green/red wire)
Trunk Pop
(Momentary
Hold)
30 Second
Timer
Latch On/Off
Latch On/Off with
Ign Reset
11
Channel 2
Output
(Blue/white wire)
2nd Unlock
Hold Button 2
Sec.
2nd Unlock
Double Press
Momentary hold 30 Second Timer
12
Channel 3
Output
(Black/white
wire)
Dome Light
*8 Sec. Pulse
with Arm*
(window roll
up)
Momentary hold 30 Second Timer
13
Channel 4
Output
(Brown/white
wire)
Horn Honk
*8 Sec. Pulse
with Arm*
(window roll
up)
Momentary hold 30 Second Timer
14
Channel 5
Output
(Orange/white
Accessory OEM Rearm
Latch On/Off
with Ign Reset
Momentary hold