User's Manual

Touch-Screen Locate/Find function description

z Locate/Find page:

Press the button to enter the Locate/Find page

z Select the transmitter:

Press button to select different transmitter which you want to

Locate/Find/Learning/Name register

z Register the name for your selected transmitter:

Press the name button to register each Locate/Find transmitter name

For example: Select TAG1 to name the 1st transmitter.

Change uppercase/lowercase Change number/words ENTER

z Locate/Find transmitter Code-Learning:

a. Press button to select different Touch-Screen transmitter which you want

to Learning.

For example:

If you want to transmitter TS1 & TS2 (please mark 1&2 on the 1

& 2

transmitter to avoid the forgetting) to

be Locate/Find each other:

Press the TS1 Locate/Find page

button to select TS2

you want to do the code-learning, then press

code-learning button.

Then press the TS2

Locate/Find page button to select TS1

you want to do the code-learning, then press code-learning button.

The TS1& TS2 will automatic to do the

Locate/Find code-learning each other within 30 seconds.

If learning successful, will display “OK” on the top-right side of the screen also a confirm melody.

Each time only allow 2 transmitters to do Locate/Find code-learning.

Please refer the above example to do the L Locate/Find code-learning for TS1/TS3, TS2/TS3, TS1/TS4,

TS2/TS4, TS3/TS4.

b. To do the 1-way transmitter Locate code-learning:

Press the Touch Screen transmitter code-learning button, within 30 seconds, press one way transmitter

button

+ together at the same time.